Monday - Friday: 7:30 AM - 4:30 PM

Air conditioning (often referred to as A/C) removes heat and moisture from the interior of an occupied space to improve the comfort of the  occupants or maintain a suitable environment for electronic equipment.   A/C also encompasses enhancing the air quality in the occupied space by removing allergens and dust particles.  RPC is venturing into clean air technology by partnering with AtmosAir.  

The AtmosAir product line features both standalone and in-duct air purification systems. These purification systems restore visibly  and measurably cleaner air to your indoor environment. AtmosAir cleans the air by introducing positive and negative ions into the air stream of a building. The nation’s largest independent testing lab confirms that AtmosAir removes coronavirus, H1N1, dust and mold spores more effectively than leading competitors. AtmosAir is an all-natural solution and the systems produce no harmful ozone or other toxic byproducts.   

AtmosAir Solutions

AtmosAir air purification systems restore visibly cleaner air to your indoor environment

AtmosAir equipment is effective in reducing odors and harmful pollutants through the introduction of positive and negative ions into the air stream to be treated. The number and size of the ionization tubes used is dependent upon the airflow, size of the space and severity of the pollution and odors.  

AtmosAir Graph

 AtmosAir’s goal is to restore the air inside your building or home to the quality found at mountain

elevations, where high ion levels occur naturally.

From bogus vaccines to fake testing sites, there’s no shortage of products flooding the market erroneously promising to defend against COVID-19. AtmosAir is proud to share that our Bi-Polar Ionization (BPI) technology is now verified by one of the preeminent laboratories for testing EPA and FDA registered sanitizing products.   Microchem Labs found that AtmosAir reduced the presence of coronavirus by 99.92% within 30 minutes of exposure to AtmosAir’s bi-polar ionization technology. 

 

AtmosAir products are available in both self-contained standalone units and in-duct models that are installed directly into the central HVAC system.  Whether for a commercial office building, a healthcare center or hospital, hotel room, or airport AtmosAir products range in applications from 500 sq. ft. to several hundred thousand sq. ft. and everything in between.  

Some models are ready off the shelf for straight installation, while others require a customized solution. Either way, AtmosAir has the right solution for your application.  Ask an RPC team member for assistance in configuring the right unit for your application.

AtmosAir 500 SERIES

The AtmosAir 500 series, models 500E, 500F and 508F, ionization generators are industrial quality units intended for installation in air conditioning systems or in custom-designed air distribution systems in commercial and industrial facilities. The 500 series equipment is designed for minimal maintenance efforts.

AtmosAir 508FC

AtmosAir 508FC

Voltage: 120 VAC/240

VAC Energy Use: < 50 watts

Number of Tubes: Eight (8)

Tube Size: F (21")

Capacity: Up to 15,000 CFM


The AtmosAir 508FC BPI system is intended to be mounted in a supply duct or supply plenum of an air handling unit. The system can be integrated on an OEM basis or retrofitted into an existing mechanical system. The size and number of 508FC ionization systems is dependent upon the airflow, size of the space, and severity of the pollution and odors.   

AtmosAir 500FC

Voltage: 120 VAC/240 VAC

Energy Use: < 50 watts

Number of Tubes: Five (5)

Tube Size: F (21")

Capacity: Up to 10,000 CFM


The AtmosAir 500FC BPI system is intended to be mounted in a supply duct or supply plenum of an air handling unit. The system can be integrated on an OEM basis or retrofitted into an existing mechanical system. The system is calibrated at the factory per AtmosAir recommendations to attain bi-polar ion levels between 500 and 1,500 ions/cm3.  

AtmosAir 500FC
AtmosAir 500EC

AtmosAir 500EC

Voltage: 120 VAC/240 VAC

Energy Use: < 50 watts

Number of Tubes: 5

Tube Size: E (14")

Capacity: Up to 8,000 CFM


The AtmosAir 500EC BPI system is intended to be mounted in a supply duct or supply plenum of an air handling unit. The system can be integrated on an OEM basis or retrofitted into an existing mechanical system. The system is calibrated at the factory per AtmosAir recommendations to attain bi-polar ion levels between 500 and 1,500 ions/cm3.  

AtmosAir MATTERHORN SERIES

The AtmosAir Matterhorn 1000 series, models Matterhorn 1000 and 1002 ionization generators are residential-sized units intended for installation in air conditioning systems or in custom  designed air distribution systems in small commercial spaces and typical residential houses. The unit is intended to operate only when air flow is present, thus, power to the ionization unit should be interlocked with fan operation, or controlled via an air pressure switch.

AtmostAir Matterhorn

AtmosAir Matterhorn 1000

Voltage: 120 VAC/240 VAC

Energy Use: 5 watts

Number of Tubes: 1

Tube Size: C/D/E/F

Capacity: Up to 2,500 CFM

The Matterhorn 1000 is a 120VAC unit equipped with one (1) tube, however it is capable of being upgraded to two (2) tubes.

AtmosAir Matterhorn 1002

Voltage: 120 VAC/240 VAC

Energy Use: 5 watts

Number of Tubes: 2

Tube Size: C/D/E/F

Capacity: Up to 5,000 CFM

The Matterhorn 1002 is always equipped with two (2) specified tubes. The size and number of ionization systems are dependent upon the airflow, size of the space, and severity of the pollution and odors. 

AtmosAir FC SERIES

The AtmosAir FC series ionization generators are units intended for installation in air conditioning systems or in custom-designed air distribution systems. AtmosAir equipment is effecve in reducing odors and harmful pollutants through the introduction of positive and negative ions into the airstream to be treated. 

AtmosAir FC SERIES
AtmosAir FC100

AtmosAir FC100

Voltage: 120 VAC/240 VAC

Energy Use: 5 watts

Number of Tubes: One (1)

Tube Size: C (8") D (10") E (15")

Capacity: Up to 2,400 CFM

The AtmosAir FC100 ionization system is intended to be mounted in the supply discharge in smaller air handling systems such as fan coils, heat pumps and other unitary type systems. The system can be integrated on an OEM basis, or a retrofit package is also available. Access to the unit’s control panel is provided. The system is calibrated at the factory per AtmosAir recommendations to attain bi-polar ion levels between 350 and 1,500 negative ions/cm3 in the space. 

AtmosAir FC400

Voltage: 12 VAC

Energy Use: 5 watts

Number of Tubes: One (1)

Tube Size: B (3")

Capacity: Up to 1,400 CFM


AtmosAir FC400 is a BPI system ideal for fan coil units, PTAC, unit ventilators, or VRF cassettes. The size and number of ionization systems are dependent upon the airflow, size of the space, and severity of the pollution and odors. 

AtmosAir FC400

AtmosAir FC400-FM

Voltage: 12 VAC

Energy Use: 5 watts

Number of Tubes: One (1)

Tube Size: B (3")

Capacity: Up to 1,400 CFM


The AtmosAir FC400-FM BPI system is intended to be duct-mounted in smaller air handling systems such as ducted fan coils, heat pumps and other unitary type systems. The system can be integrated on an OEM basis or a retrofit package is also provided. The unit will be calibrated at the factory per AtmosAir recommendations to attain ion level readings of between 500 and 1,500 ions/cm3.

AtmosAir EVEREST

AtmosAir Everest

Voltage: 120 VAC/240 VAC

Energy Use: 60W

Capacity: Up to 810 Square Feet


The AtmosAir Everest ionization system is a standalone air purifier that incorporates a 7 stage filtration system, UV-C light and Bi-Polar Ionization.  

AtmosAir RANIER SUMMIT

The AtmosAir Rainier Summit is a standalone self-contained compact unit designed to increase ionization levels to restore indoor air to its natural state where no pollution or contaminants exist. The Rainier’s patented active ionization technology has been rigorously tested and scientifically proven to be extremely effective at reducing harmful particulates, irritating volatile organic compounds (VOC’s) and odors as well as killing off mold, bacteria, viruses and germs in the air and on surfaces.

Competitive Product Comparison Chart

Competitive Product Comparison Chart